Our 15″ active model is supplied with a dual output professional grade 1000W amplifier, allowing for easily adding another passive sub 15 with each active sub. Cable management for power, signal and daisy chaining another passive sub is easy as there are cable channels on three locations (bottom and both sides).
Our sub 15 is built in a very strong 25mm birch plywood material, providing it with the rigidness required for even the most demanding applications.
Both sides also has passages, allowing for cables to be easily, hidden and elegantly run over to the next sub.
The sub is also supplied with a neat, magnetic front cover, allowing it to also be placed free standing if not installed in a front baffle wall. The sub includes removable feet, as well as a cable management hole also at the bottom, allowing for hiding the power and signal cable.
The removable rubber feet provides decoupling as well as spacing for hidden cables run underneath the sub.
THE HARD FACTS
| Speaker type | Sealed 15" sub designed by Hamrammr |
| Amplifier | 1000W @ 4Ohms |
| Driver size | 15" |
| SPL | 117dB peak in-room |
| Power handling RMS / MAX | 800W / 1600W |
| Xmax | 19mm |
| Magnet | Ferrite |
| Voice coil diameter | 2,5" |
| Impedance | 4Ω (Dual coil 2Ohm) |
| Frequency response | 25Hz - 200Hz (-3 dB) / 17Hz - 200Hz typical in-room |
| Dimensions / weight | 94cm (H) x 47cm (W) x 30cm (D) / 70 kilos |
| Cabinet construction | 25mm birch plywood & tour-grade textured finish |
| Application | Baffle wall or free standing subwoofer |
| Included accessories | 3m powercon cable (220V) |